Product definition:

Lifting type fixed lifting goods elevator is a kind of non scissor type lifting platform. It is applicable to the transfer of goods between floors of industrial plants, restaurants and restaurants. The minimum height is 150-300 mm and no upper lifting point is required. Diversified forms (single column, double column, four column). The equipment is stable in operation, simple and reliable in operation, with various hydraulic and electrical protections, and convenient in goods transmission. Lifting type fixed hydraulic elevator is widely used in industrial and mining enterprises to lift goods instead of elevators. It has the characteristics of simple structure, large load, long service life, convenient maintenance, safety and practicality, especially suitable for places with shaft underground where the foundation cannot be dug.

Elevator goods ladder:

Rail elevator, also known as cargo elevator, is mainly used to transport goods up and down between various working floors; it is difficult to solve the narrow space such as the high-rise building above the second floor of the three-dimensional garage and the underground garage, the place where the pit cannot be excavated, and the place where the height of the top floor cannot reach the requirements.

Dali Machinery Co., Ltd. will make every effort to build a high-efficiency delivery platform for you. The product hydraulic system is equipped with anti falling, upper and lower door interactive chain. Operation buttons can be set on each floor and the lifting table to achieve multi-point control. The product has strong structure, large bearing capacity, stable lifting, simple and convenient installation and maintenance. It is an economic and practical low floor alternative to the elevator's ideal cargo conveying equipment. According to the installation environment and use requirements of the lifting platform, different optional configurations can be selected to achieve better use effect,

Product features:

1. Realize multi-point control, interactive interlocking between upper and lower floors to achieve safe use;

2. High lifting height, side mounted oil cylinder, stable operation, convenient maintenance and long service life;

3. Power off manual descent and emergency stop button, convenient, fast and practical;

4. The floor door can be connected, the inside and outside of the workshop can be poked open mutually, convenient and space saving;

5. Especially suitable for 2-5 floors, floors and workshops, both inside and outside;

6. The pump station adopts the imported pump station. If the speed requirements are too high, the imported customized pump station is used to meet the ideal delivery requirements,

7. Imported oil cylinder and seal parts are used to solve the problem of unstable oil pressure and oil leakage of parts and components, and solve the worries behind.

Security and stability advantages:

1. Overflow valve: it can prevent the system pressure from being too high during upward movement;

2. Emergency manual valve: in case of power failure, it can make the car descend to the nearest floor position to open the door;

3. Manual pump: in case of system failure, the manual pump can be operated to pump out high-pressure oil to lift the car to the nearest floor position;

4. Pipeline rupture valve: when the hydraulic system pipeline breaks and the lift car stalls and falls, it can automatically cut off the oil circuit and stop falling;

5. Oil temperature protection of oil tank: when the oil temperature in the oil tank exceeds the standard setting value, the oil temperature protection device will generate a signal, suspend the use of the elevator, and start when the oil temperature drops;

6. Low failure rate: due to the use of advanced hydraulic system and good control mode, the failure rate of elevator operation can be minimized.

7. Less power consumption: when the hydraulic goods elevator goes down, it is driven by the pressure generated by the self weight, which greatly saves energy.

Such products are generally customized according to the actual use environment and requirements of customers, without specific product standard parameters.