Guide rail vertical lifting platform-Jiangmen Dalift Machinery Co., Ltd.

Product introduction:

The guide rail straight top lifting platform is a hydraulic lifting platform without soft traction, which adopts multi-level synchronous expansion cylinder. Different from the traditional lifting and scissor type lifting platform on the market, the lifting type is chain link, scissor type is hinge link, the straight top platform is hard link, without chain traction and hinge link. It is mainly used for loading in middle and high-rise floors and complex places on the operation site Lifting cargo.

The vertical lifting platform of guide rail is mainly used to transport goods between working floors; It is difficult to solve the narrow space between the two and three floors of the three-dimensional garage and the underground garage, the place where the pit cannot be excavated, and the place where the top floor cannot reach the required height, etc. with great efforts, the machinery will try its best to create an efficient delivery platform for you. The product hydraulic system is equipped with anti falling, upper and lower door interactive interlocking, and the operation buttons can be set for each floor and the working table of the lifting table, Realize multi-point control. The product has strong structure, large bearing capacity, stable lifting, simple and convenient installation and maintenance. It is an economic and practical low floor alternative to the elevator's ideal cargo conveying equipment.

Product introduction:

1. The lifting platform has been inspected and debugged before leaving the factory. All technical indexes meet the design requirements. When using, only the power supply needs to be connected, and the hydraulic and electrical systems do not need to be adjusted;

2. Before using the platform, check the hydraulic and electrical systems carefully, and use it only after there is no leakage or bare leakage;

3. The lifting platform can only be loaded after 1-3 times of empty operation;

4. The center of gravity of the load shall be at the center of the worktable as far as possible.

The following is the normal size of the guide rail type lifting platform. You can customize your design according to the size of your customers! Package delivery, package installation!
NO.	model	Maximum height（mm）	Platform size（mm）	Rated load（kg）	Motor power（KW）	supply voltage（V）	Texture of material
1	DLLG-2	2000	2500*2000	2000	4	380	45manganese steel
2	DLLG-3	3000	2500*2000	1000	3	380	45manganese steel
3	DLLG-4	4000	2500*2000	3000	5.5	380	45manganese steel
4	DLLG-5	5000	2500*2000	1000	3	380	45manganese steel
5	DLLG-6	6000	2500*2000	2000	4	380	45manganese steel
6	DLLG-9	9000	2500*2000	3000	5.5	380	45manganese steel
7	DLLG-10	10000	2500*2000	1000	4	380	45manganese steel
8	DLLG-12	12000	2500*2000	2000	5.5	380	45manganese steel
9	DLLG-13	13000	2500*2000	3000	7.5	380	45manganese steel
10	DLLG-15	15000	2500*2000	2000	7.5	380	45manganese steel